OilField Products
Since 1968 Lubsur® manufacturer of lubricants and compounds for oilfield, industrial and water well markets. Its´ high-performance products extreme conditions and fit many application needs within industry. Lubsur® producing high-quality anti-seizes & thread lubricants, drilling compounds, cleaners & degreasers, extreme pressure greases, extruded gasket compounds, food grade products, open gear lubricants, sealing compounds, thread sealants, valve injectable packings, valve lubricants, water rehabilitation products and wire rope lubricants & oils.
Lubsur ® Bio HTFG EP , Bio-based (eco-safe) lubricating greases for high temperature applications with excellent extreme pressure EP and anti-wear performance for food processing and packaging machinery.
TYPICAL DATA:
• Pour Point: (NLGI 0: -30°C; NLGI 1: -30° NLGI 2: -30°C)
• Viscosity @40°C: (42.10; 42.10; 42.10))
• Thickener: Aluminum Complex
• Color: White
• Food Processing, Fisheries, Agriculture, Water Treatment Plants
• Readily Biodegradable / Conform to VGP / EAL.
• Lubricant NSF Classification: MEETS PARAMETERS BUT NOT CLASSIFIED / THIS PRODUCT IS NOT REGISTERED.Conform to U.S. FDA and USDA
requirements of lubricants with incidental food contact. Are accepted
by the CFIA for use in Registered Plants and for use on
food equipment or machinery parts where contact with food is only incidental.
* Lubsur ® Bio HTFG EP (Latam) , Grasa lubricante de base biológica (ecosegura) para aplicaciones de altas temperaturas con excelentes prestaciones de de extrema presión EP y antidesgaste para maquinaria de procesado y envasado de alimentos.
Lubsur ® NikExt CP , Superior sealing and anti-seize compound for use in extreme temperatures and hostile environments.
* Lubsur ® NikExt CP (Latam) , Compuesto antigripante y para juntas de calidad superior para uso en temperaturas extremas y entornos hostiles.
TYPICAL DATA:
• Grease Carrier: Aluminum Complex
• Dropping Point (ASTM D566): 260°C (500°F)
• Water Spray-Off (ASTM D4049): <8.0%
• Density (kg/liter), typical: 1.10
• Specific Gravity: 1.10
• Oil Separation, Wt. % Loss Max: 3.0
• Penetration (ASTM D217) 25°C (77°F): 290 - 320
• Penetration (ASTM D217) -18°C (0°F): 235
• NLGI Number (typical): 1.5
• Corrosion Resistance (Modified ASTM B117) 20% NaCl at 100°F, Hours Free From Corrosion: 200+
• Coefficient of Friction (1" 316 Stainless Steel): 0.15
• Evaporation Loss, Wt. % 24 Hours @ 100°C (212°F): <1.0
• Copper Strip Corrosion (ASTM D4048): 1A
Lubsur ® MP Marine HT , High-temperature lithium complex multi-purpose lubricating grease. It contains a special anti-rust additive to improve rust and corrosion protection in marine and saltwater environments.
* Lubsur ® MP Marine HT (Latam) , Grasa lubricante multiuso de complejo de litio para altas temperaturas. Contiene un aditivo antioxidante especial para mejorar la protección contra el óxido y la corrosión en entornos marinos y de agua salada.
TYPICAL DATA:
• Colour: Green
• NLGI Grade: 2
• Soap Type: Lithium Complex
• Base Oil Viscosity, ISO: 220
• Timken OK Load, kg: 23
• Drop Point, °C: 275°
• 4-ball Weld Load, kg: 315
• EMCOR Corrosion Test, synthetic sea water: 0/0
• Continuous Operating Temperature, °C: -15° to +170°
• Maximum Temperature, Intermittent use, °C: 180°
• DIN 51502: KP2N-30
• ISO 6743: ISO-L-XCDIB 2
Lubsur ® GearBox EP , EP extreme pressure lubricating grease, thickened with lithium soap, mixed with extreme pressure additives, anti-wear and rust and oxidation inhibitors.
* Lubsur ® GearBox EP (Latam) , Grasa lubricante de extrema presión EP, espesada con jabón de litio, mezclada con aditivos de extrema presión, antidesgaste e inhibidores de herrumbre y oxidación.
TYPICAL DATA:
• Colour: Brown
• NLGI Grade: 00
• Soap Type: Lithium
• Density at 15°C, kg/L: 0.9
• Base Oil Viscosity, ISO: 150
• Operating Temperature Range °C: -20° to +130°
• Appearance: Smooth Grease
• Timkin OK Load, kg: 18
• Drop Point, °C: 170
• 4-ball Weld Load, kg: 250
Lubsur ® Marine GO HD , Lubricating grease originally designed to exceed the requirements of Heimdal gearboxes commonly used in tugboats, fishing vessels, workboats and other vessels requiring high pulling capacity, as well as for equipment operating under difficult conditions.
* Lubsur ® Marine GO HD (Latam) , Grasa lubricante diseñada originalmente para superar los requisitos de las cajas de engranajes Heimdal utilizadas habitualmente en remolcadores, buques pesqueros, barcos de trabajo y otras embarcaciones que requieren una gran capacidad de arrastre, así como para equipos que operan en condiciones difíciles.
TYPICAL DATA:
• Colour: Amber
• Viscosity, SAE Equivalent: 85W-140
• Viscosity, ISO: 300
• Density at 15°C, kg/L: 0.901
• Viscosity, Kinematic, cSt at 40°C: 264
• Viscosity, Kinematic, cSt at 100°C: 30.1
• Viscosity Index: 153
• Zinc, Mass %: 0.131
• API GL-4
• MAN 341SL (level)
• ZFN 13010 (level)
Lubsur ® Chain Premium WR , High quality, highly adhesive, waterproof, antifling, wear resistant chain lubricant for industrial, automotive and mining applications.
* Lubsur ® Chain Premium WR (Latam) , Lubricante para cadenas de alta calidad, altamente adhesivo, impermeable, antifling, resistente al desgaste para aplicaciones industriales, de automoción y minería
Applications:
• A premium quality, highly adhesive, waterproof, anti-fling, wear resistant Chain Lubricant for industrial, automotive and mining applications
• Very good resistance to heat, remaining very stable up to 160°C.
• Extremely water resistant: Protects and prolongs chain life
• Excellent adhesion: Will not fling off, lowers lubricant usage
• Excellent corrosion resistance: Extends chain life
• Wear resistant: Increases life of chain
Lubsur ® AZ Compound FG , Multi-purpose Lubricant, Anti-Seize and Assembly Lubricant.
* Lubsur ® AZ Compound FG (Latam) , Lubricante multiusos, antigripaje y de montaje.
TYPICAL DATA:
• Appearance: Off White smooth paste
• Carrier: Synthetic oil
• Solid lubricant: White lubricating solids
• Four Ball Weld Load (IP239): 600kg
• Water washout (ASTM D1264) @ 38°C: <1% max.
• Dynamic corrosion resistance (EMCOR) (IP 220): 0:0
• Coefficient of friction: 0.12
• Operating temperature range as a service lubricant: -30°C
• Operating temperature range as an anti-seize: -30°C
• Lubricant NSF Classification: MEETS PARAMETERS BUT NOT CLASSIFIED / THIS PRODUCT IS NOT REGISTERED.Conform to U.S. FDA and USDA
requirements of lubricants with incidental food contact. Are accepted
by the CFIA for use in Registered Plants and for use on
food equipment or machinery parts where contact with food is only incidental.
Lubsur ® CZ Compound AZ , Bentone-based anti-seize lubricating grease containing micro-sized copper, zinc oxide and additional synthetic base oil that withstands temperatures up to 1093°C.
* Lubsur ® CZ Compound AZ (Latam) , Grasa lubricantes antigripante a base de bentona, que contiene cobre de tamaño micro, óxido de zinc y aceite base sintético adicional que resiste temperaturas de hasta 1093°C.
TYPICAL DATA:
• Colour: Copper
• NLGI Grade: 1.5
• Soap Type: Bentone Clay
• Density at 15°C, kg/L: 0.95
• Solid Content, %: 20
• Base Oil Viscosity, ISO: 460
• Operating Temperature Range °C: 0°C to+1093°C
• Appearance: Smooth Paste
• Drop Point, °C: Non-Melt
• Solidification Point: -18°C
Lubsur ® Poly Coupling CG , Lithium-based lubricating grease for high performance and extreme pressure applications in industrial couplings.
* Lubsur ® Poly Coupling CG (Latam) , Grasa lubricantes base litio, para aplicaciones de alto rendimiento y extrema presión en acoplamientos industriales.
TYPICAL DATA:
• NLGI Grade: 0.5/1
• Thickener: Lithium
• Color: Dark Amber
• Dropping Point, °C (°F): >177 (>350)
• Density, lbs/gal: 7.55
• Penetration, ASTM D217 Worked 60 strokes: 335
• Penetration, ASTM D217 Worked 10,000 strokes: 305
• Texture: Tacky
• Four-Ball EP, ASTM D2596, Weld Load, kgf: 315
• Four-Ball Wear, ASTM D2266, Scar Diameter, mm: 0.40
• Koppers Centrifugal Oil Separation Test, K36, ASTM D4425 24 hrs, 50°C, vol %: <2
• Oxidation Stability, ASTM D942, 100 hrs, Pressure Drop, psi (kPa): 5 (35)
• Base Oil PropertiesViscosity (with polymer)cSt @ 40°C: >3,200
• Base Oil PropertiesViscosity (with polymer)cSt @ 100°C: 142
• Viscosity (without polymer) cSt @ 40°C: 620
• Viscosity (without polymer) cSt @ 100°C: 30
• Usable Temperature Range °C: -12 to 121
• Usable Temperature Range °F: 10 to 250
Lubsur ® Moly3 EP , Multi-purpose high temperature lubricating grease. It contains a lithium soap base with premium base oils and 3% molybdenum disulfide (moly) for added EP protection.
* Lubsur ® Moly3 EP (Latam) , Grasa lubricante multiuso para altas temperaturas. Contiene una base de jabón de litio con aceites base de primera calidad y un 3% de disulfuro de molibdeno (moly) para una mayor protección EP.
TYPICAL DATA:
• Colour: Grey/Black
• NLGI Grade: 2
• Soap Type: Lithium
• Density at 15°C, kg/L: 0.9
• Solid Content, %: 3
• Base Oil Viscosity, ISO: 220
• Operating Temperature Range °C: -20° to +130°
• Appearance: Stringy/Tacky
• Timken OK Load, kg: 18
• Drop Point, °C: 190
• 4-ball Weld Load, kg: 315
• Water Washout, 1hr/80°C, %: 4
Lubsur ® MolyFive HS , Lubricating grease specially designed to meet specifications for use in heavy and agricultural machinery, formulated to lubricate fittings and lubrication points in high load and high speed applications.
* Lubsur ® MolyFive HS (Latam) , Grasa lubricante especialmente diseñada para cumplir especificaciones de uso en maquinarias pesadas y agricolas, formulada para engrasar racores y puntos de lubricación en aplicaciones de alta carga y alta velocidad.
TYPICAL DATA:
• NLGI #: 0 / 1 / 2
• Ambient Range, °F: -40° to +95° / -31° to +104° / -22° to +122°
• Ambient Range, °C: -40° to +35° / -35° to +40° / -30° to +50°
• Operating Range, °F: -49° to +300° / -40° to +300° / -25° to +300°
• Operating Range, °C: -45° to +149° / -40° to +149° / -32° to +149°
• Base Fluid Type: Petroleum / Petroleum / Petroleum /
• Thickener Type: Calcium Sulf. Cplx. / Calcium Sulf. Cplx. / Calcium Sulf. Cplx.
• Color: Gray / Gray / Gray
• % Molybdenum disulfide: 5 / 5 / 5
• Worked Penetration (mm): 355-385 / 310-340 / 265-295
• % Change/100,000 stroke: (+/-5) / (+/-5) / (+/-5)
• Roll Stability w/H2 O, % change: (+/-5) / (+/-5) / (+/-5)
• Viscosity Index, Min: (N/A) / (N/A) / (N/A)
• Viscosity @ 100°C, cSt: 11.5 / 11.5 / 11.5
• Viscosity @ 40°C, cSt: 150 / 150 / 150
• 4 Ball Wear (mm) Max, Typ.: 0.5 / 0.5 / 0.5
• 4 Ball E.P. Weld Point (kg) Min.: 620 / 620 / 620
• Timken E.P. Test OK load (lb) Typ.: 60 / 60 / 60
• Oxidation-psi drop/500 hr Max: (N/A) / (N/A) / (N/A)
• Rust Test: Pass / Pass / Pass
• Salt Fog Test, hours: +4,000 / +4,000 / +4,000
• Copper Corrosion: 1a / 1a / 1a
• Dropping Point: +288°C (+550°F) / +288°C (+550°F) / +288°C (+550°F)
Lubsur ® StandarGraph LS , Lubricating grease with graphite is designed for the lubrication of spring leaves, hand brake cables, flexible transmissions and exposed chains, hand brake cables, flexible transmissions and exposed chains.
* Lubsur ® StandarGraph LS (Latam) , Grasa lubricantes con grafito está diseñada para la lubricación de hojas de resorte, cables de freno de mano, transmisiones flexibles y cadenas expuestas, cables de freno de mano, transmisiones flexibles y cadenas expuestas.
TYPICAL DATA:
• Colour: Grey/Black
• NLGI Grade: 3
• Soap Type: Calcium (Graphite)
• Graphite Content, %: 15
• Base Oil Viscosity, ISO: 100
• Operating Temperature Range °C: to +60° Max.
• Drop Point, °C: 80
Lubsur ® J Heavy Duty CV , Special lubricating grease ideal for CV joints and universal joints in automotive applications where a high strength and high load capacity grease is required. in automotive applications where a high strength, high load capacity grease is required. It is perfect for ball joints, pivots and general chassis lubrication.
* Lubsur ® J Heavy Duty CV (Latam) , Grasa lubricante especial ideal para juntas homocinéticas y juntas universales en aplicaciones de automoción en las que se requiere una grasa de alta resistencia y gran capacidad de carga. en aplicaciones de automoción en las que se requiere una grasa de alta resistencia y gran capacidad de carga.
TYPICAL DATA:
• Colour: Grey/Black
• NLGI Grade: 1.5
• Soap Type: Lithium Complex
• Density at 15°C, kg/L: 0.9
• Base Oil Viscosity, ISO: 460
• Operating temperature range: to +160°C
• Appearance: Smooth/Tacky
• Timken OK Load, kg: >20
• Drop point (IP 132): >300°C
• Shell Four Ball (IP239) Weld load: 500kg
• Rust Prevention Rating, D1743: Pass
• Pumpability, Lincoln Ventmeter @ 0°C, psi: 800
• Water Washout, 1hr/80°C, %: <5
Lubsur ® ElectriKlean IC , Industrial degreaser cleaner based on a blend of high performance organic solvents specially formulated to quickly dissolve and rinse dirt, grease, grime, oil, tar and wax, without harming the environment or ozone.
* Lubsur ® ElectriKlean IC (Latam) , Limpiador desengrasante uso industrial elavorado base a mezcla de disolventes orgánicos de alto rendimiento especialmente formulado para disolver y aclarar rápidamente la suciedad, la grasa, la mugre, el aceite, el alquitrán y la cera, sin dañar el medio ambiente ni el ozono.
TYPICAL DATA:
• Solvent Type: Mixed Biodegradable Esters
• Specific Gravity, Typical: 0.85
• Density (kg/liter), Typical: 0.85
• Flash Point (ASTM D-92): >66°C (150°F)
• Dielectric Strength and Breakdown Voltage (ASTM D-877): 29 kVs
Lubsur ® HandClean MT , Hand cleaner, removes dirt, oil, grease and other industrial soils quickly and thoroughly.
* Lubsur ® HandClean MT (Latam) , Limpiador para manos, elimina la suciedad, el aceite, la grasa y otras suciedades industriales de forma rápida y completa.
TYPICAL DATA:
• Density at 20°C, kg/L: 1.1
• Appearance: Pale Yellow, Viscous Liquid
• Specific Gravity: 1.1
• Fragrance: Citrus
• pH (undiluted): 6-8
Lubsur ® HDClean IC , Cleaner designed for use in a wide range of applications such as degreasing, floor and shop surface cleaning, sink cleaning, pressure cleaning and vehicle washing.
* Lubsur ® HDClean IC (Latam) , Limpiador diseñado para su uso en una amplia gama de aplicaciones como desengrase, limpieza de suelos y superficies de talleres, limpieza de lavabos, limpieza a presión y lavado de vehículos.
TYPICAL DATA:
• Please Note: Do not use this product undiluted on aluminium surfaces.
• Colour: Yellow
• Density at 20°C, kg/L: 1.0
• pH: 7.0
Lubsur ® DSolve IC , Cleaner suitable for cleaning oil and grease from surfaces such as engine parts and other surfaces where the removal of grease, oil, sludge and dirt is required.
* Lubsur ® DSolve IC (Latam) , Limpiador adecuado para la limpieza de aceite y grasa de superficies tales como piezas de motor y otras superficies donde se requiera la eliminación de grasa, aceite, lodo y suciedad.
TYPICAL DATA:
• Colour: Clear
• Density at 15°C, kg/L: 0.830
• Flash Point, °C: 68
• Viscosity (cSt) at °C: 68
Lubsur ® MultiWash IC , Powerful, multi-purpose, biodegradable detergent cleaner capable of cleaning the dirtiest cars, motorcycles, 4x4, trucks, tractors, boats, caravans and other vehicles. It's unique formula does not damage or streak paintwork. It can be safely used on all modern automotive paint finishes and will not harm aluminum, vinyl, rubber, glass or fiberglass.
* Lubsur ® MultiWash IC (Latam) , Limpiador detergente biodegradable, multiusos y de gran potencia, capaz de limpiar los coches, motos, 4x4, camiones, tractores, barcos, caravanas y otros vehículos más sucios. Su fórmula exclusiva no daña ni deja rayas en la pintura. Se puede utilizar con seguridad en todos los acabados de pintura de automóviles modernos y no daña el aluminio, el vinilo, la goma, el cristal ni la fibra de vidrio.
TYPICAL DATA:
• Colour: Blue
• Density at 20°C, kg/L: 1.0
• Boiling Point Point °C : 100°C
• ph: 7.0
• Water based, non-flammable
• Biodegradable, quick-break formulation
• pH neutral, phosphate and salt free
• Easy and economical to use
• Capable of heavy duty cleaning
• Wide range of vehicle/equipment type use
Lubsur ® 5460 SERIE "H" or (Standard) "S" , The Lubsur ® 5460 SERIE "H" or (Standard) "S" GEAR OIL ranges have been specially formulated for use as industrial gearbox lubricants in the food manufacturing environment. As such, they have achieved approval within a number of different gear designs, these include: Helical, Helical Bevel, Planetary and Worm gears.
• Product Code (SERIE "H" ): L / 5460PGH - "H"
• Product Code (SERIE "S" ): L / 5460PGH - "S"
• Product Code (SERIE "E" ): L / 5460PGH - "E"
SERIE "H" ISO: (032H, 046H, 068H,
100H, 150H, 220H, 320H, 460H)
SERIE "S" ISO: (032S, 046S, 068S,
100S, 150S, 220S, 320S, 460S)
SERIE "E" ISO: (032E, 046E, 068E,
100E, 150E, 220E, 320E, 460E)
This product is manufactured in accordance with current requirements and in accordance with US Food and Drug Administration (FDA) guidelines. This product is manufactured in plants that meet the requirements of the Canadian Food Inspection Agency (CFIA) inspection regulations and the parameters set out in ISO 21469 / 2006 for the manufacture of lubricants that may have incidental contact with food. This product is formulated and certified by our quality control department following current regulations. The implementation and use of this product is the sole responsibility of the purchaser and end user.
Conform to U.S. Food and Drug Administration (FDA) requirements of lubricants with
incidental food contact, 21 CFR 178.3570 (178.3750) (178.3620). Lubricants with incidental
food contact should not contaminate food at levels greater than 10 ppm. Are accepted by the
Canadian Food Inspection Agency for use in Registered Plants and for use on food equipment
or machinery parts where contact with food is only incidental.
Lubsur ® 5460 SERIE "H" or (Standard) "S"
GEAR OIL does not contain natural products derived from animals, nuts or genetically modified
organisms (GMO). It is suitable for use in the preparation of vegetarian and nut-free foods.
Lubsur ® 5460 SERIE "H" or (Standard) "S" GEAR OIL
GEAR OIL does not promote the growth of bacteria or fungal organisms.
NOTE: "The capacity and technical performance of
Lubsur ® 5460 SERIE "H" or (Standard) "S"
products are totally identical and only differ slightly
in the color of the product. The "H" series has a slightly dark amber color suitable
for applications where a quick visualization is required in case of eventual leakage.
In the (Standard) "S" series the final product is light amber less visually noticeable."
* Lubsur ® 5460 SERIE "H" or (Estándar) "S" (Latam)
, Las gamas de ACEITES PARA ENGRANAJES Lubsur ® 5460 SERIE "H"
or (Estándar) "S" se han formulado
especialmente para su uso como lubricantes de cajas de engranajes industriales en el entorno
de la fabricación de alimentos. Como tales, han logrado la aprobación en un número de
diferentes diseños de engranajes, estos incluyen: Engranajes helicoidales, cónicos,
planetarios y helicoidales.
SERIE "H"
• 5 gal Pail: 5460PGH-05
• 55 gal Drum: 5460PGH-55
SERIE "S"
• 5 gal Pail: 5460PGS-05
• 55 gal Drum: 5460PGS-55
Net weight according to product density.(View PDS)
The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.
Lubsur ® Xtra Valve AF
, is a superior valve lubricant which reduces friction during operation of valves.
It allows valves to turn easily, thereby extending their lifetime and performance.
Contains 100% Synthetic Oils with a non-soap thickener.
Lubsur ® Xtra Valv AF is resistant to Aliphatic Hydrocarbons, Aromatic Crude
Distillates, Crude Oil, Diesel Fuel, Hydrocarbon Liquids, Kerosene, LPG, Lubricating
Oils and Natural Gas, Water and Condensates, as well as Drilling Muds.
It is waterproof and will not harden. Lubsur ® Xtra Valve AF Synthetic Valve
Lubricant adheres to metal assuring protection against rust and corrosion.
TYPICAL DATA:
• Insoluble in water
• Non melting and non-hardening
• Rust, Corrosion and oxidation preventive
• Resists crude oil, oilfield brine water, diesel and sea water
• Physical Appearance: Brown, smooth, tacky
• NLGI: 3
• Penetration (ASTM D217): 230-260
• Flash Point: >450°F (232°C)
• Service Temperatures: -20°F to 450°F (-29°C to 232°C)
Lubsur ® Ultra Valve HP
, This product has withstood testing in condensate, high pressure and up to 42% CO2.
Lubsur ® Ultra Valve HP is a superior Valve Sealant which greatly enhances the
sealing ability of passing valves. It allows valves to seal thereby extending their
lifetime and performance.
Lubsur ® Ultra Valve HP is resistant to solvents and chemicals including sour gas,
sour crude, hydrogen sulphide, crude oil, diesel, carbon dioxide, hydrochloric acid,
brine, water and condensates, as well as drilling muds. It is waterproof and will
not harden. As a Sealant, it adheres to valve seats and internal parts.
TYPICAL DATA:
• Insoluble in water
• Lubricates valve internals
• Resists was out
• Compatible with other lubricants
• Non melting
• Non hardening
• Reduces friction during operation of valves
• Physical Appearance: Dark Green and Tacky
• NLGI: 0
• Penetration (ASTM D217): 355-385
• Flash Point: >550°F (288°C)
• Service Temperatures: 0°F to 400°F -18°C to 204°C
Lubsur ® FPC VF
, is a superior valve flush/penetrant/cleaner. It is a multi-ingredient, semi-fluid
combination of penetrants, cleaners and lubricants engineered for difficult or impossible
to operate valves.
Lubsur ® FPC VF (Valve Flush) is for use on hard to operate, passing or seized valves.
It will penetrate and clean valve seats and ball.
TYPICAL DATA:
• Free passing or tight valves
• Penetrant and Cleans valve internals
• Removes surface rust, lacquer, gum
• Compatible with lubricants
• Non-flammable
• Physical Appearance: Smooth Black
• NLGI: 1
• Penetration (ASTM D217): N/A
• Flash Point: >200°F
• Service Temperatures: -40°F to 400°F -40°C to 400°C
Lubsur ® SST SV
, is a synthetic sealant formulated for general hydrocarbon service
where older valves are passing. It contains fine PTFE flakes suspended in a hydrocarbon
resistant base.
Lubsur ® SST SV is used for sealing valves with moderate seal wear and is also suitable
for use on threads, gaskets, stuffing boxes and valve stems.
Lubsur ® SST SV can be used to seal valves in the following services: Aliphatic
hydrocarbons, crude distillates, crude oil, diesel fuel, hydrocarbon liquids, kerosene,
LPG and lubricating oils.
TYPICAL DATA:
• Seals valve with moderate seal wear
• Resists was out
• Compatible with other lubricants
• Has PTFE suspended flakes
• Physical Appearance: Blue and Tacky
• NLGI: 1-2
• Penetration (ASTM D217): 280-310
• Flash Point: >500°F (260°C)
• Service Temperatures: 0°F to 450°F -18°C to 232°C
Mining Products | Ecological Products | Industrial Products | Marine (off shore) Products | Oil Field Products | Sanitation Products | High Performance Oils | Specialties Products