LUBSUR MARINE PRODUCTS (OFFSHORE) ECOSAFE

Marine Products (Offshore) EcoSafe

Lubsur® is an maker, lubricants grease, coolants and chemical, with over 50 years of experience in the Offshore, Marine and Renewable Energy industries. Our wide range of high-performance marine lubricants provide reduced maintenance, enhanced oil life and superior machine operating performance.

Lubsur ® Bento Grease HT , A superior quality, non-melting lubricating grease for use in plain and anti-friction bearings subjected to high temperatures.

• Product Code: L / WRHTBTG

* Lubsur ® Bento Grease HT (Latam) , Grasa lubricante no fundente de calidad superior para uso en cojinetes lisos y antifricción sometidos a temperaturas elevadas.

TYPICAL DATA:
• Appearance: Brown
• NLGI Consistency: 2
• Thickener: Bentonite
• Base Oil: Solvent refined mineral oil
• Base Oil Viscosity @ 40°C (cSt): 110
• Worked Penetration: 265 to 295
• Dropping Point (°C): >260
• Oil Separation (%): 2
• Copper Corrosion: Pass
• Water Washout @ 38°C (%): 5
• Operating Temperature Range (°C): -20 to +160
• Performance Level: DIN 51502 KH2R-20 / ISO 6743-9 L-XBEHA2

• 5 gal Pail: LWRHTBTG-05 • 55 gal Drum: LWRHTBTG-55

Net weight according to product density.(View PDS)

The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.

Lubsur ® Bio HTFG EP , Bio-based (eco-safe) lubricating greases for high temperature applications with excellent extreme pressure EP and anti-wear performance for food processing and packaging machinery.

• Product Code: L / FGHTHVG

TYPICAL DATA:
• Pour Point: (NLGI 0: -30°C; NLGI 1: -30° NLGI 2: -30°C)
• Viscosity @40°C: (42.10; 42.10; 42.10))
• Thickener: Aluminum Complex
• Color: White
• Food Processing, Fisheries, Agriculture, Water Treatment Plants
• Readily Biodegradable / Conform to VGP / EAL.
• Lubricant NSF Classification: MEETS PARAMETERS BUT NOT CLASSIFIED / THIS PRODUCT IS NOT REGISTERED.Conform to U.S. FDA and USDA requirements of lubricants with incidental food contact. Are accepted by the CFIA for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental.

* Lubsur ® Bio HTFG EP (Latam) , Grasa lubricante de base biológica (ecosegura) para aplicaciones de altas temperaturas con excelentes prestaciones de de extrema presión EP y antidesgaste para maquinaria de procesado y envasado de alimentos.

• 5 gal Pail: LFGHTHVG-05 • 55 gal Drum: LFGHTHVG-55

Lubsur ® RWS LL , Lubricating grease for long life applications for use in railway switches plates where a high performance and environmentally friendly product is required.

• Product Code: L / RWSLLEG

* Lubsur ® RWS LL (Latam) , Grasa lubricante para aplicaciones de larga duración para uso en placas de agujas de ferrocarril donde se requiera un producto de alto rendimiento y respetuoso con el medio ambiente.

TYPICAL DATA:
• Appearance Visual: Fluid
• Colour* Visual: Yellow
• Thickener Type: Complex
• Temperature Range: -40°C to 60°C
• Unworked Penetration IP 50: 445-475
• Oil Separation (40°C, 168hrs)IP 121(MOD): 8%
• 4 Ball Wear Scar IP 239: 0.5mm
• 4 Ball Weld Load IP 239: 250kg
• Copper Corrosion (100°C, 24hrs)IP 122: 1a
• Base Oil Type: Ester
• Base Oil Kinematic Viscosity (40°C): 45cSt
• Base Oil Flash Point IP 34: 220°C
• Base Oil Pour Point IP 15: -30°C
• USA Environmentally Acceptable Lubricant: Yes

• 5 gal Pail: LRWSLLEG-05 • 55 gal Drum: LRWSLLEG-55

Lubsur ® MP Marine HT , High-temperature lithium complex multi-purpose lubricating grease. It contains a special anti-rust additive to improve rust and corrosion protection in marine and saltwater environments.

• Product Code: L / OSMLHTG

* Lubsur ® MP Marine HT (Latam) , Grasa lubricante multiuso de complejo de litio para altas temperaturas. Contiene un aditivo antioxidante especial para mejorar la protección contra el óxido y la corrosión en entornos marinos y de agua salada.

TYPICAL DATA:
• Colour: Green
• NLGI Grade: 2
• Soap Type: Lithium Complex
• Base Oil Viscosity, ISO: 220
• Timken OK Load, kg: 23
• Drop Point, °C: 275°
• 4-ball Weld Load, kg: 315
• EMCOR Corrosion Test, synthetic sea water: 0/0
• Continuous Operating Temperature, °C: -15° to +170°
• Maximum Temperature, Intermittent use, °C: 180°
• DIN 51502: KP2N-30
• ISO 6743: ISO-L-XCDIB 2

• 5 gal Pail: LOSMLHTG-05 • 55 gal Drum: LOSMLHTG-55

Lubsur ® Marine GO HD , Lubricating grease originally designed to exceed the requirements of Heimdal gearboxes commonly used in tugboats, fishing vessels, workboats and other vessels requiring high pulling capacity, as well as for equipment operating under difficult conditions.

• Product Code: L / GBOSSMG

* Lubsur ® Marine GO HD (Latam) , Grasa lubricante diseñada originalmente para superar los requisitos de las cajas de engranajes Heimdal utilizadas habitualmente en remolcadores, buques pesqueros, barcos de trabajo y otras embarcaciones que requieren una gran capacidad de arrastre, así como para equipos que operan en condiciones difíciles.

TYPICAL DATA:
• Colour: Amber
• Viscosity, SAE Equivalent: 85W-140
• Viscosity, ISO: 300
• Density at 15°C, kg/L: 0.901
• Viscosity, Kinematic, cSt at 40°C: 264
• Viscosity, Kinematic, cSt at 100°C: 30.1
• Viscosity Index: 153
• Zinc, Mass %: 0.131
• API GL-4
• MAN 341SL (level)
• ZFN 13010 (level)

• 5 gal Pail: LGBOSSMG-05 • 55 gal Drum: LGBOSSMG-55

Lubsur ® Chain Premium WR , High quality, highly adhesive, waterproof, antifling, wear resistant chain lubricant for industrial, automotive and mining applications.

• Product Code: L / CHMNWRO

* Lubsur ® Chain Premium WR (Latam) , Lubricante para cadenas de alta calidad, altamente adhesivo, impermeable, antifling, resistente al desgaste para aplicaciones industriales, de automoción y minería

Applications:
• A premium quality, highly adhesive, waterproof, anti-fling, wear resistant Chain Lubricant for industrial, automotive and mining applications
• Very good resistance to heat, remaining very stable up to 160°C.
• Extremely water resistant: Protects and prolongs chain life
• Excellent adhesion: Will not fling off, lowers lubricant usage
• Excellent corrosion resistance: Extends chain life
• Wear resistant: Increases life of chain

• 5 gal Pail: LCHMNWRO-05 • 55 gal Drum: LCHMNWRO-55

Lubsur ® AZ Compound FG , Multi-purpose Lubricant, Anti-Seize and Assembly Lubricant.

• Product Code: L / AZFGMPC

* Lubsur ® AZ Compound FG (Latam) , Lubricante multiusos, antigripaje y de montaje.

TYPICAL DATA:
• Appearance: Off White smooth paste
• Carrier: Synthetic oil
• Solid lubricant: White lubricating solids
• Four Ball Weld Load (IP239): 600kg
• Water washout (ASTM D1264) @ 38°C: <1% max.
• Dynamic corrosion resistance (EMCOR) (IP 220): 0:0
• Coefficient of friction: 0.12
• Operating temperature range as a service lubricant: -30°C
• Operating temperature range as an anti-seize: -30°C
• Lubricant NSF Classification: MEETS PARAMETERS BUT NOT CLASSIFIED / THIS PRODUCT IS NOT REGISTERED.Conform to U.S. FDA and USDA requirements of lubricants with incidental food contact. Are accepted by the CFIA for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental.

• 5 gal Pail: LAZFGMPC-05

Lubsur ® CZ Compound AZ , Bentone-based anti-seize lubricating grease containing micro-sized copper, zinc oxide and additional synthetic base oil that withstands temperatures up to 1093°C.

• Product Code: L / CUAZSTC

* Lubsur ® CZ Compound AZ (Latam) , Grasa lubricantes antigripante a base de bentona, que contiene cobre de tamaño micro, óxido de zinc y aceite base sintético adicional que resiste temperaturas de hasta 1093°C.

TYPICAL DATA:
• Colour: Copper
• NLGI Grade: 1.5
• Soap Type: Bentone Clay
• Density at 15°C, kg/L: 0.95
• Solid Content, %: 20
• Base Oil Viscosity, ISO: 460
• Operating Temperature Range °C: 0°C to+1093°C
• Appearance: Smooth Paste
• Drop Point, °C: Non-Melt
• Solidification Point: -18°C

• 5 gal Pail: LCUAZSTC-05

Lubsur ® C Direct FG , Lubricating grease designed as a non-toxic high temperature grease, containing special anti-wear additives and other additives suitable for applications in the food industry.

• Product Code: L / FGDCHPG

* Lubsur ® C Direct FG (Latam) , Grasa lubricante diseñada como grasa no tóxica para altas temperaturas, que contiene aditivos especiales antidesgaste y otros aditivos idoneos para aplicaciones en la industria alimentaria.

TYPICAL DATA:
• Appearance: White grease
• NLGI Classification: 1
• Thickener: Inorganic Thickner
• Drop point (IP 132): None
• Base oil: Blend of white oils
• Solid lubricant: Direct food additives
• Copper corrosion (IP112): Pass
• Water washout (ASTM D1264) @ 38°C: <2% max.
• Dynamic corrosion resistance (EMCOR) (IP 220): 0:0
• Shell Four Ball (IP239) Weld load: 400kg
• Scar Diameter @ 40kg 1 Hr: 0.83mm
• Operating temperature range: -30°C to +120°C
• Lubricant NSF Classification: MEETS PARAMETERS BUT NOT CLASSIFIED / THIS PRODUCT IS NOT REGISTERED.Conform to U.S. FDA and USDA requirements of lubricants with incidental food contact. Are accepted by the CFIA for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental.

• 5 gal Pail: LFGDCHPG-05

Lubsur ® Transyn FG , 100% synthetic premium grade lubricating grease, non-melting, translucent. For industrial applications and laboratory equipment.

• Product Code: L / FGTSING

* Lubsur ® Transyn FG (Latam) , Grasa lubricante 100% sintética grado premium, no fundente, translúcida. Para aplicaciones industriales y equipos de laboratorio.

TYPICAL DATA:
• Appearance: White translucent grease
• NLGI Classification: 2
• Thickener: Inorganic Thickner
• Drop point (IP 132): None
• Base oil: Blend of Synthetic Hydrocarbons
• Viscosity @ 40°C: 330 cSt
• Oil Separation: None
• Solid lubricant: PTFE
• Water washout (ASTM D1264) @ 38°C: <2% max.
• Dynamic corrosion resistance (EMCOR) (IP 220): 0:0
• Shell Four Ball (IP239) Weld load: 210kg
• dN factor: 500,000
• Operating temperature range: -40°C to +160°C
• Lubricant NSF Classification: MEETS PARAMETERS BUT NOT CLASSIFIED / THIS PRODUCT IS NOT REGISTERED.Conform to U.S. FDA and USDA requirements of lubricants with incidental food contact. Are accepted by the CFIA for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental.

• 5 gal Pail: LFGTSING-05

Lubsur ® HI TPTFE FG , Lubricating grease for high temperature applications and where extreme performance is required.

• Product Code: L / FGHITPG

* Lubsur ® HI TPTFE FG (Latam) , Grasa lubricante para aplicaciones de altas temperaturas y donde se requiera rendimiento extremo.

TYPICAL DATA:
• Appearance: White semi-translucent grease
• NLGI Classification: 2
• Thickener: Inorganic Thickner
• Drop point (IP 132): None
• Base oil: High viscosity silicone oil
• Solid lubricant: PTFE
• Copper corrosion (IP112): Pass
• Water washout (ASTM D1264) @ 38°C: <2% max.
• Dynamic corrosion resistance (EMCOR) (IP 220): 0:0
• Shell Four Ball (IP239) Weld load: 180kg
• Mean Hertz Load: 30kg
• dN factor: 200,000
• Operating temperature range: -20°C to +220°C
• Lubricant NSF Classification: MEETS PARAMETERS BUT NOT CLASSIFIED / THIS PRODUCT IS NOT REGISTERED.Conform to U.S. FDA and USDA requirements of lubricants with incidental food contact. Are accepted by the CFIA for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental.

• 5 gal Pail: LFGHITPG-05

Lubsur ® Food W-EP FG , High performance EP water resistant (water repellent) lubricating grease.

• Product Code: L / FGHPEPG

* Lubsur ® Food W-EP FG (Latam) , Grasa lubricante EP de alto rendimiento resistente al agua. (hidrofuga)

TYPICAL DATA:
• NLGI Grade ASTM D217: 2
• Colour Visual: Off White
• Dropping point, °C ASTM D2265: >280
• Consistency, 60 strokes, mm/10 IP 50: 280
• 4-ball EP :LWI,kg IP 239: 55
• 4-ball EP :Weld load,kg: 400
• Water washout (ASTM D1264) @ 38°C: <2% max.
• 4-ball wear, mm IP 239: 0.70
• Rust test, rating ASTM D1743: Pass
• Copper corrosion, rating ASTM D4048: 1B
• Base oil viscosity @ 40 °C, cSt: 200
• Base oil viscosity @ 100 °C,cSt: 23
• Operating temperature range: -40°C to +220°C
• Lubricant NSF Classification: MEETS PARAMETERS BUT NOT CLASSIFIED / THIS PRODUCT IS NOT REGISTERED.Conform to U.S. FDA and USDA requirements of lubricants with incidental food contact. Are accepted by the CFIA for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental.

• 5 gal Pail: LFGHPEPG-05

Lubsur ® Food CS FG , High performance calcium sulfonate based food grade lubricating grease.

• Product Code: L / FGCSHPG

* Lubsur ® Food CS FG (Latam) , Grasa lubricante grado alimentaria a base de sulfonato cálcico de alto rendimiento.

TYPICAL DATA:
• NLGI Grade ASTM D217: 2
• Colour Visual: Tan
• Texture Visual: Smooth
• Dropping point, °C ASTM D2265: >318
• Consistency, 60 strokes, mm ASTM D217: 280
• Mechanical stability, 10.000 ASTM D217: 4.5
• strokes % change Roll stability, 50% water, % ASTM D1831: 2.5
• change in pen.Timken OK load, kg ASTM D2509: 27.2
• 4-ball EP ASTM D2596 LWI, kg: 55
• 4-ball EP ASTM D2596 Weld load, kg: 500
• 4-ball wear, mm ASTM D2266: 0.50
• Rust test, rating ASTM D1743: Pass
• Copper corrosion, rating ASTM D4048: 1B
• Wheel bearing leakage, grams ASTM D4290: 3.5
• Bearing life performance, hours ASTM D3527: 260
• Water washout at 80 °C, % lost ASTM D1264: 3.5
• Oil separation, % loss ASTM D1742: 0.1
• Thickener: Over based Calcium Sulfonate
• Base oil viscosity @ 40 °C, cSt: 400
• Base oil viscosity @ 100 °C, cSt: 37.5
• Temperature Range °C: -40° to 165°
• Lubricant NSF Classification: MEETS PARAMETERS BUT NOT CLASSIFIED / THIS PRODUCT IS NOT REGISTERED.Conform to U.S. FDA and USDA requirements of lubricants with incidental food contact. Are accepted by the CFIA for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental.

• 5 gal Pail: LFGCSHPG-05 • 55 gal Drum: LFGCSHPG-55

Lubsur ® SilcoGrease FG , FG silicone lubricating grease, non-melting, dielectric grease for high temperature applications.

• Product Code: L / FGSILCG

* Lubsur ® SilcoGrease FG (Latam) , Grasa lubricante de silicona FG, no fundente, grasa dieléctrica para aplicaciones de alta temperatura.

TYPICAL DATA:
• Appearance: White semi-translucent grease
• NLGI Classification: 2
• Thickener: >Inorganic Thickener
• Drop point (IP 132): Non melting
• Base oil: High viscosity silicone oil
• Worked Penetration: 220-270
• Copper corrosion (IP112): Pass
• Dielectric Strength: 16 kV/mm
• Water washout (ASTM D1264) @ 38°C: <2% max.
• Dynamic corrosion resistance (EMCOR) (IP 220): 0:1
• Shell Four Ball (IP239) Weld load: 180kg
• Mean Hertz Load: 30kg
• dN factor: 200,000
• Operating temperature range: -55°C to +205°C
• Lubricant NSF Classification: MEETS PARAMETERS BUT NOT CLASSIFIED / THIS PRODUCT IS NOT REGISTERED.Conform to U.S. FDA and USDA requirements of lubricants with incidental food contact. Are accepted by the CFIA for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental.

• 5 gal Pail: LFGSILCG-05

Lubsur ® P Bearing FG , High performance lubricating grease for rolling bearings.

• Product Code: L / FGBEAPG

* Lubsur ® P Bearing FG (Latam) , Grasa lubricantes de alto rendimiento para rodamientos.

TYPICAL DATA:
• Appearance: Off White tacky
• NLGI Grade: 2
• Thickener: Aluminium complex
• Drop point (IP 132): >230°C
• Base oil: A Blend of Synthetic Oils
• Solid Lubricant: White lubricating solids and PTFE
• Copper corrosion (IP112): Negative
• Water washout (ASTM D1264) @ 38°C: <1% max.
• Dynamic corrosion resistance (EMCOR) (IP 220): 0:0
• Shell Four Ball (IP239) Weld load: 450kg
• Shell Four Ball (IP239) dN factor: 500,000
• Operating temperature range: -50°C to +170°C
• APPLICATIONS: Suitable for all plain and anti-friction bearings as well as sliding surfaces
• Lubricant NSF Classification: MEETS PARAMETERS BUT NOT CLASSIFIED / THIS PRODUCT IS NOT REGISTERED.Conform to U.S. FDA and USDA requirements of lubricants with incidental food contact. Are accepted by the CFIA for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental.

• 5 gal Pail: LFGBEAPG-05 • 55 gal Drum: LFGBEAPG-55

Lubsur ® EX Food FG , Semi-fluid food grade lubricating grease for extreme pressure applications.

• Product Code: L / FGEXFLG

* Lubsur ® EX Food FG (Latam) , Grasa lubricante grado alimentario de consistencia semifluida para aplicaciones de extrema presión.

TYPICAL DATA:
• Appearance: Off White tacky grease
• NLGI Grade: 00
• Thickener: Aluminium complex
• Base oil: Blend of Synthetic Oils
• Solid Lubricant: White lubricating solids
• Copper corrosion (IP112): Negative
• Water washout (ASTM D1264) @ 38°C: <1% max.
• Dynamic corrosion resistance (EMCOR) (IP 220): 0:0
• Shell Four Ball (IP239) Weld load: 450kg
• Shell Four Ball (IP239) dN factor: 500,000
• Operating temperature range: -50°C to +160°C
• APPLICATIONS: Suitable for all plain and anti-friction bearings as well as sliding surfaces
• Lubricant NSF Classification: MEETS PARAMETERS BUT NOT CLASSIFIED / THIS PRODUCT IS NOT REGISTERED.Conform to U.S. FDA and USDA requirements of lubricants with incidental food contact. Are accepted by the CFIA for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental.

• 5 gal Pail: LFGEXFLG-05 • 55 gal Drum: LFGEXFLG-55

Lubsur ® FP Food FG , Semi-fluid food grade lubricating grease for extreme pressure applications.

• Product Code: L / FGFPXFG

* Lubsur ® FP Food FG (Latam) , Grasa lubricante grado alimentario de consistencia semifluida para aplicaciones de extrema presión.

TYPICAL DATA:
• Appearance: Off White tacky grease
• NLGI Grade: 000
• Thickener: Aluminium complex
• Base oil: Blend of Synthetic Oils
• Solid Lubricant: White lubricating solids
• Copper corrosion (IP112): Negative
• Water washout (ASTM D1264) @ 38°C: <1% max.
• Dynamic corrosion resistance (EMCOR) (IP 220): 0:0
• Shell Four Ball (IP239) Weld load: 450kg
• Shell Four Ball (IP239) dN factor: 500,000
• Operating temperature range: -50°C to +165°C
• APPLICATIONS: Suitable for all plain and anti-friction bearings as well as sliding surfaces
• Lubricant NSF Classification: MEETS PARAMETERS BUT NOT CLASSIFIED / THIS PRODUCT IS NOT REGISTERED.Conform to U.S. FDA and USDA requirements of lubricants with incidental food contact. Are accepted by the CFIA for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental.

• 5 gal Pail: LFGFPXFG-05 • 55 gal Drum: LFGFPXFG-55

Lubsur ® SFGA X550 SERIE FG

Lubsur ® 5460 SERIE "H" or (Standard) "S" , The Lubsur ® 5460 SERIE "H" or (Standard) "S" GEAR OIL ranges have been specially formulated for use as industrial gearbox lubricants in the food manufacturing environment. As such, they have achieved approval within a number of different gear designs, these include: Helical, Helical Bevel, Planetary and Worm gears.

• Product Code (SERIE "H" ): L / 5460PGH - "H"
• Product Code (SERIE "S" ): L / 5460PGH - "S"
• Product Code (SERIE "E" ): L / 5460PGH - "E"

SERIE "H" ISO: (032H, 046H, 068H,
100H, 150H, 220H, 320H, 460H)
SERIE "S" ISO: (032S, 046S, 068S,
100S, 150S, 220S, 320S, 460S)
SERIE "E" ISO: (032E, 046E, 068E,
100E, 150E, 220E, 320E, 460E)

This product is manufactured in accordance with current requirements and in accordance with US Food and Drug Administration (FDA) guidelines. This product is manufactured in plants that meet the requirements of the Canadian Food Inspection Agency (CFIA) inspection regulations and the parameters set out in ISO 21469 / 2006 for the manufacture of lubricants that may have incidental contact with food. This product is formulated and certified by our quality control department following current regulations. The implementation and use of this product is the sole responsibility of the purchaser and end user.

Conform to U.S. Food and Drug Administration (FDA) requirements of lubricants with incidental food contact, 21 CFR 178.3570 (178.3750) (178.3620). Lubricants with incidental food contact should not contaminate food at levels greater than 10 ppm. Are accepted by the Canadian Food Inspection Agency for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental.

Lubsur ® 5460 SERIE "H" or (Standard) "S" GEAR OIL does not contain natural products derived from animals, nuts or genetically modified organisms (GMO). It is suitable for use in the preparation of vegetarian and nut-free foods. Lubsur ® 5460 SERIE "H" or (Standard) "S" GEAR OIL GEAR OIL does not promote the growth of bacteria or fungal organisms.

NOTE: "The capacity and technical performance of Lubsur ® 5460 SERIE "H" or (Standard) "S" products are totally identical and only differ slightly in the color of the product. The "H" series has a slightly dark amber color suitable for applications where a quick visualization is required in case of eventual leakage. In the (Standard) "S" series the final product is light amber less visually noticeable."

* Lubsur ® 5460 SERIE "H" or (Estándar) "S" (Latam) , Las gamas de ACEITES PARA ENGRANAJES Lubsur ® 5460 SERIE "H" or (Estándar) "S" se han formulado especialmente para su uso como lubricantes de cajas de engranajes industriales en el entorno de la fabricación de alimentos. Como tales, han logrado la aprobación en un número de diferentes diseños de engranajes, estos incluyen: Engranajes helicoidales, cónicos, planetarios y helicoidales.

SERIE "H"
• 5 gal Pail: 5460PGH-05 • 55 gal Drum: 5460PGH-55

SERIE "S"
• 5 gal Pail: 5460PGS-05 • 55 gal Drum: 5460PGS-55

Lubsur ® SST SV , is a synthetic sealant formulated for general hydrocarbon service where older valves are passing. It contains fine PTFE flakes suspended in a hydrocarbon resistant base.

Lubsur ® SST SV is used for sealing valves with moderate seal wear and is also suitable for use on threads, gaskets, stuffing boxes and valve stems.

Lubsur ® SST SV can be used to seal valves in the following services: Aliphatic hydrocarbons, crude distillates, crude oil, diesel fuel, hydrocarbon liquids, kerosene, LPG and lubricating oils.

• Product Code: L / SSTSEAV

TYPICAL DATA:
• Seals valve with moderate seal wear
• Resists was out
• Compatible with other lubricants
• Has PTFE suspended flakes
• Physical Appearance: Blue and Tacky
• NLGI: 1-2
• Penetration (ASTM D217): 280-310
• Flash Point: >500°F (260°C)
• Service Temperatures: 0°F to 450°F -18°C to 232°C

• 5 gal Pail: SSTSEAV-05