INNOVATIONS              SERVICES                PRODUCTS                INDUSTRIES                FEEDBACK           COMPANY PROFILE        HOME
 
 
 
 
 
 
Lubsur Products
Food Grade Products
Lubsur's complete line of NSF H-1 conform to U.S. Food and Drug Administration (FDA) requirements of lubricants with incidental food contact, 21 CFR 178.3570. Lubricants with incidental food contact should not contaminate food at levels greater than 10 ppm. Are accepted by the Canadian Food Inspection Agency for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental , Food Machinery Lubricants is designed to provide total food processing and bottling plant lubrication capability. Formulated from high-quality base stocks combined with unique premium, anti-wear additives, these lubricants exceed many performance specifications of conventional H1 to H-2 lubricants.
 
Lubsur 413
Lubsur 422
Lubsur 449
Lubsur 413 with PTFE is a premium all-purpose grease that provides superior performance and protection for metal with moving parts. It penetrates and forms a long lasting protective film to withstand heavy loads and high speeds, prevents rust and corrosion, eliminates squeaks and squeals and will not run or wash away.
 
Service range: -18C to 190C
According to requirements NSF H2.
 
Lubsur 422 is an special complex grease lubricant for use in meat and poultry plants. Regulations and is specifically designed for use in the food processing industry where it may have incidental contact with food items.
Lubsur 422 is used in a wide range of temperatures. In food processing machinery it is recommended for the lubrication of roller, needle, ball, journal, and slide bearings.
 
Service range: -35C to 260C, Conform to U.S. Food and Drug Administration (FDA) requirements of lubricants with incidental food contact, 21 CFR 178.3570. Lubricants with incidental food contact should not contaminate food at levels greater than 10 ppm. Are accepted by the Canadian Food Inspection Agency for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental.
 
Lubsur 449 is a premium quality anti-seize compound developed specifically for use in applications where incidental food contact is possible. This aluminum complex based anti-seize is composed entirely of ingredients that meet USDA/FDA requirements and is approved by Agri-Food Canada for use in federally inspected meat and poultry plants Lubsur 449 protects metal parts from seizure, galling, rust, corrosion and heat freeze by tenaciously adhering to the metal surface. It provides a degree of safety and protection unsurpassed by any other product.
 
Service range: -54C to 982C
According to requirements NSF H1.
 

 

Lubsur 5460S (GLFL)
Lubsur 5460-HT
H1 FOOD GREASE (5460 SERIE)
Lubsur 5460H
Lubsur 5460S SERIE GEAR OIL (GLFL) grades consist of a range of ISO lubricants formulated to provide the user with superior performance under demanding operating conditions, known to provide outstanding micropitting and Gear Oil GLFL-HTEPH1-PGSTMN characteristics are used to manufacture these lubricants. With the addition of a high performance additive package, these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability as well as good corrosion protection.
 
Service range: Conform to U.S. Food and Drug Administration (FDA) requirements of lubricants with incidental food contact, 21 CFR 178.3570. Lubricants with incidental food contact should not contaminate food at levels greater than 10 ppm. Are accepted by the Canadian Food Inspection Agency for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental
 
Iso: 220, 460 (SE 460 HT-5).
 
 
Lubsur 5460-HT is an special complex grease lubricant for use in meat and poultry plants. Regulations and is specifically designed for use in the food processing industry where it may have incidental contact with food items.
 
Service range: (GS) -35C to >320C and (GA)-26C to 280C , Conform to U.S. Food and Drug Administration (FDA) requirements of lubricants with incidental food contact, 21 CFR 178.3570. Lubricants with incidental food contact should not contaminate food at levels greater than 10 ppm. Are accepted by the Canadian Food Inspection Agency for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental
 
Types:
GS  / Special Complex
GA / AL Complex
 
Lubsur 5460H SERIE GEAR OIL grades consist of a range of ISO lubricants formulated to provide the user with superior performance under demanding operating conditions, known to provide outstanding micropitting and Gear Oil HTEPH1-PGSTMN characteristics are used to manufacture these lubricants. With the addition of a high performance additive package, these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability as well as good corrosion protection.
 
Service range: Conform to U.S. Food and Drug Administration (FDA) requirements of lubricants with incidental food contact, 21 CFR 178.3570. Lubricants with incidental food contact should not contaminate food at levels greater than 10 ppm. Are accepted by the Canadian Food Inspection Agency for use in Registered Plants and for use on food equipment or machinery parts where contact with food is only incidental
 
Iso: 46, 68, 100, 150, 220
 
Lubsur 467
Lubsur 476
Lubsur 458
Lubsur 467 is a water based cleaner degreaser that uniquely combines nonhazardous cleaning agents with newly developed emulsifying technology to provide a product that can effectively remove carbon, grease, oil and other organic deposits while being both environmentally safe and ozone friendly. Lubsur 467 is tomorrow's answer to today's cleaning problems - totally effective, yet safe for our environment and atmosphere. Use full strength for maximum results in shortest time.
 
Service range: -35C to 260C
According to requirements NSF H1.
 
Lubsur 476 is a premium quality, water resistant grease for use in food processing environments where incidental food contact may occur. FEATURES, High degree of water resistance, Excellent corrosion protection, Good anti-wear and extreme pressure properties. Lubsur 476 also meets the requirements of the United States Food and Drug Administration under section 21 CFR 121.2553, and also 121.2610 (US Department of Agriculture), for use where incidental contact with food or feed may occur.
 
Service range: -30C to 140C
According to requirements NSF H1.
Lubsur 458 is an aluminum complex grease lubricant for use in meat and poultry plants. It meets or exceeds the requirements of CFR Title 21, Paragraph 178.3750 of FDA Regulations and is specifically designed for use in the food processing industry where it may have incidental contact with food items.
 
Service range: -18C to 204C
According to requirements NSF H1.
 
 
 
Lubsur SFGAX550
Type HD Grade 2
Food Grade Products
 Conform to U.S. Food and Drug Administration (FDA) requirements of lubricants with incidental food contact, 21 CFR 178.3570. Lubricants with incidental food contact
Lubsur SFGAX550  is an aluminum special complex grease lubricant for use in meat and poultry plants. It meets or exceeds the requirements of CFR Title 21, Paragraph 178.3750 of FDA Regulations and is specifically designed for use in the food processing industry where it may have incidental contact with food items.
 
Service range: -26C to 350C
According to requirements NSF H1.
           
made by:
Lubricants Liquids & Compound I . Group
SCC Division Specialties
 
 

 
 
 
 
   
Lubsur FOOD-MOLD
Mold Release Lubricants (L9)

   

Lubsur HT-S  NLGI 2
White mineral oils are among the most versatile petroleum products and are used in a wide variety of applications. Because of their extreme purity, these oils may be employed where only highly refined products are suitable from pharmaceuticals to cosmetics to plastics to food processing, Penreco offers the Mineral Oil that meets your highest standards.
 
TYPE: 9 (Mold Release Lubricants)
ASTM D-2161,SUS @ 100 F: 80/90
ASTM-D7042, CST @ 40 C: 14.2/17.0
ASTM D-4052,@ 77 F: .833/.861
ASTM D-92: 385F/196C
ASTM D-97:0F/-18C
 
 
Lubsur HT-S NLGI 2 is a high performance high temperature lubricant specialty developed for the grease lubrication of machinery in the food and beverage processing and packaging industry. It in based on an inorganic thickener, synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food and beverage industry.  is an special grease lubricant for use in meat and poultry plants. It meets or exceeds the requirements of CFR Title 21, Paragraph 178.3750 of FDA Regulations and is specifically designed for use in the food processing industry where it may have incidental contact with food items.
 
Compatible with the elastomers, gaskets, seals, and paints normally used in food machinery lubrication systems.
 
Applications: Joints, linkages and slides. Centralised automatic lubrication systems.Plain and rolling element bearings.
 
NLGI: 2
Appearance: white translucente gold.
Thickener: Inorganic
W. Penetration (25 C) 1/10mm: 265-295
v.+40C mm2/s: 400
 v.+200C mm2/s: 6
Dropping Point: None
 
Service range: -35C to 260C.
According to requirements NSF H1.
Excellent high temperature performance.
Good water resistance.
Good oxidation and mechanical stability.
Efective corrosion prevention characteristics.
Good adhesive properties.
Neutral odour and taste.
 
made by:
Lubricants Liquids & Compound I . Group
SCC Division Specialties - Alberta CA
 
 
2016 Copyright, info@lubsur.com  Lubricants & Surfactants Corporation AL.CANADA, Specialty Chemicals and Lubricants, Registered trademark owned and licensed by
Lubricants & Surfactants Corporation AL.CANADA, Manufacture a Distributed Worldwide by Lubricants & Surfactants Corporation AL.CANADA, All rights reserved